Descrição
O ET-7026 é um módulo para aquisição de dados multifuncional, com 6 canais analógico de entrada, 2 canais analógico de saída e digital 2 entradas e 2 saídas. Várias opções para faixa de entrada(+/-500 mV, +/-1 V, +/-5 V, +/-10 V, +/-20 mA, 0 ~ 20 mA e 4 ~ 20 mA), e também para saída(+/-5 V, +/-10 V, 0 ~ 20 mA e 4 ~ 20 mA). Faixa de entrada analógica configurada independente com proteção de 240Vrms. Também cada entrada/saída analógica podem ser programadas para aceitar corrente ou tensão, de acordo com a posição do jumper.
- Módulo Aquisição de Dados Analógico Ethernet
- Protocolo de comunicação Modbus TCP/UDP
- Incorpora Web Server para fácil configuração, monitoração e controle
- Função HMI via Web: páginas WEB dinâmicas para monitorar e controlar os sinais
- Função Conexão ao Pares dos sinais, entre módulos com entradas e saídas analógicas
- Interface de comunicação Ethernet 1x 10/100Base-Tx, RJ45
- Sinais entrada e saída:
> 6 Entras Diferencial Analógica
> 2 Saídas Analógica
> 2 Entradas/Contador Digital
> 2 Saídas Digital
- Alimentação 10 ~ 30Vdc
- Fixação trilho DIN
- Temperatura de operação -25 ~ 75ºC
Características
- Área: Aquisição de Dados
- Característica: Modbus TCP/UDP
- Interface: Ethernet
Garantia
PDF - Datasheet
Mais Informações
Software |
Built-in Web Server |
Yes |
CPU Module |
Watchdog Timer |
Module, Communication (Programmable) |
Isolation |
2-way Isolation |
Ethernet: 1500 VDC
I/O: 2500 VDC |
EMS Protection |
EFT (IEC 61000-4-4) |
±4 kV for Power Line |
ESD (IEC 61000-4-2) |
±4 kV Contact for Each Terminal
±8 kV Air for Random Point |
Surge (IEC 61000-4-5) |
±0.5 kV for Power Line |
LED Indicators |
Status |
Run, Ethernet |
Analog Input |
Channels |
6 (Differential) |
Type |
Voltage
Current |
Range |
±500 mV, ±1V, ±5 V, ±10 V
0 to 20 mA, ±20 mA, 4 to 20 mA
(Jumper Selectable) |
Resolution |
16-bit |
Accuracy |
Normal Mode: ±0.1%
Fast Mode: ±0.5% or better |
Sampling Rate |
Normal Mode: 10 Hz (total channels)
Fast Mode: 50 Hz (total channels) |
Input Impedance |
Voltage: 2 MΩ
Current: 125 Ω |
Common Voltage Protection |
±200 VDC |
Overvoltage Protection |
240 Vrms |
Overcurrent Protection |
50 mA @ 110 VDC (max.) |
Individual Channel Configuration |
Yes |
Open Wire Detection |
For 4 to 20 mA only |
Isolation |
±400 VDC, Virtual Channel to Channel Isolation |
Analog Output |
Channels |
2 |
Type |
Voltage
Current |
Range |
+0 to +5 VDC, ±5 VDC, +0 to +10 VDC, ±10 VDC
0 to 20 mA, 4 to 20 mA
(Jumper Selectable) |
Resolution |
12-bit |
Accuracy |
±0.1% of FSR |
Open Wire Detection |
For 4 to 20 mA only |
Voltage Output Capability |
10 V @ 20 mA |
Current Load Resistance |
500 Ω |
Individual Channel Configuration |
Yes |
Power-on Value |
Programmable |
Safe Value |
Programmable |
Digital Input/Counter |
Channels |
2 |
Type |
Dry Contact
Wet Contact |
ON Voltage Level |
Dry: Close to GND
Wet: +1 VDC (max.) |
OFF Voltage Level |
Dry: Open
Wet: +3.5 to +30 VDC |
Max. Counts |
4,294,967,295 (32-bit) |
Frequency |
100 Hz |
Min. Pulse Width |
5 ms |
Effective Distance |
500m (max.) |
Overvoltage Protection |
+30 VDC |
Digital Output |
Channels |
2 |
Type |
Isolated Open Collector |
Sink/Source (NPN/PNP) |
Sink |
Load Voltage |
+5 to +50 VDC |
Load Current |
700 mA/channel |
Overvoltage Protection |
+60 VDC |
Overload Protection |
1.4 A |
Short-circuit Protection |
Yes |
Power on Value |
Programmable |
Safe Value |
Programmable |
Ethernet |
Ports |
1 x RJ-45, 10/100 Base-TX |
Security |
ID, Password and IP Filter |
Protocol |
Modbus TCP, Modbus UDP |
Power |
Reverse Polarity Protection |
Yes |
Consumption |
3.6 W (max.) |
Powered from Terminal Block |
+10 to +30 VDC |
Mechanical |
Dimensions (mm) |
72 x 123 x 35 (W x L x H) |
Installation |
DIN-Rail mounting |
Environment |
Operating Temperature |
-25 ~ +75 °C |
Storage Temperature |
-30 ~ +80 °C |
Humidity |
10 to 90% RH, Non-condensing |